(+86) |arron@cisco-supplier.com
Cisco Network Router Modules VIC3-2FXS-E/DID
Products Visitors:1529
Products description:

My friends, because to market fluctuations, in order to reduce the cost of your purchase, please contact our customer service, let us give you develop the best logistics solutions, thank you for your cooperation!


The following are the important parameters of our products:


Specifications

  1. Model no.: VIC3-2FXS-E/DID
  2. Feature: Cisco Two-Port Voice Interface Card - FXS and DID (OPX Lite FXS). 2-port Enhanced FXS/DID voice/fax interface card.


  Cisco voice interface cards (VICs) support voice technologies. VICs can be installed in interface card slots on supported Cisco access routers or in 1- or 2-slot voice network modules that are installed in network module slots on supported Cisco access routers.

  A Foreign Exchange Station (FXS)/Direct Inward Dialing (DID) interface connects directly to a standard telephone, fax machine, or similar device. This interface supplies ringing voltage, dial tone, and so on to the station.


  This Cisco voice interface card (VIC3-2FXS-E/DID) is supported on the following Cisco routers:

Cisco 2800 series routers, including the Cisco 2801, Cisco 2811, Cisco 2821, and Cisco 2851

Cisco 3800 series routers, including the Cisco 3825 and Cisco 3845

Cisco IAD2430 series routers

Feature Description
Interface Type FXS (for OPX Lite applications) and DID trunk
Cisco IOS Software Release 12.4(20)T
Cisco Part Number 800-27471-02
Compliance FCC Class B device, CE
Safety Conformance UL1950
Spare VIC2-2FXS-E/DID=
Address Signaling Formats
• In-band DTMF
• Out-of-band pulse (8-12 pps)
Signaling Modes FXS: loop-start, ground-start
DID: Immediate, delay dial, wink start
DID Loop Resistance Up to 1800 ohms (including terminal equipment)
FXS Loop Resistance Up to 1400 ohms (including phone or terminal equipment)
On-Hook Voltage  -44V
Off-Hook Loop Current 35 mA for FXS and 25 mA for DID (max)
Ringing Tone Configurable for different country requirements
Ringing Voltage 62 Vrms into 2 REN at zero loop length (balanced)
Ringing Frequencies 20 Hz, 25 Hz, 30 Hz, 50 Hz
REN Loading 2 REN / port (max)
Ringing DC Offset Options 10V, 20V, 24V, 30V and 35V DC (reduces ringing amplitude), Default = 0V (balanced)
Disconnect Supervision Power denial (Calling Party Control, far-end disconnect)
Caller ID On-hook transmission of frequency-shift-keying (FSK) data
Loop Length  Up to 11,000 feet (3.3 KM) 24 AWG Category 5 twisted pair cable
Physical Connector RJ-11
Number of Connectors/Ports Two
MTBF 2,534,574 hours

Packaing & Delivery:

Packaging detail:Cisco New&Original boxes

Delivery detail: within 5-7working days after the receipt of payment


Shippingment:

1.We ship to worldwide by Fedex DHL UPS TNT.

2.Tracking number will be sent once the item has been sent out, shipping information will be displayed on the website.

3. If you have preferred carrier, please notify us In advance. Shipping costa are calculated based on weight and size of the package


Payment:

We accept Western Union/Escrow or T/T,Paypal


Warranty:

All the product have 1 years warranty.


We also can provide:

Cisco HWIC Series Router Modules Cisco HWIC Series Router Modules Cisco VIC Series Router Modules Cisco VWIC2 Series Router Modules
HWIC-4B-S/T= HWIC-1FE VIC2-2FXO= VWIC2-1MFT-T1/E1=
HWIC-4ESW-POE HWIC-2FE= VIC2-4FXO= VWIC2-2MFT-T1/E1=
HWIC-4T1/E1= HWIC-1ADSL VIC2-2BRI-NT/TE= VWIC2-1MFT-G703=
HWIC-D-9ESW HWIC-1ADSL-M VIC3-4FXS/DID VWIC2-2MFT-G703=
HWIC-D-9ESW-POE HWIC-1DSU-T1= VIC3-2FXS/DID  
HWIC-1GE-SFP HWIC-1B-U= VIC3-2FXS-E/DID  
HWIC-4T= HWIC-2A/S= VIC3-2E/M  
HWIC-4A/S= HWIC-1T=    
HWIC-8A/S-232= HWIC-2T=    
HWIC-8A= HWIC-1CE1T1-PRI=    
HWIC-16A= HWIC-2CE1T1-PRI=    
HWIC-AP-G-E HWIC-3G-CDMA-S    
HWIC-ADSL-B/ST HWIC-3G-CDMA-V    
HWIC-2SHDSL= HWIC-4ESW    
HWIC-4SHDSL-E=      




Bookmarkand Share

Inquiry Now

Your Name:

E-mail:

Phone:

Message:

*

 

New Products
Relative Keywords
You may also be interested in:
Business Type: